E1: File %s open failed! %d
E2: Format failed!
E3: File %s key error!
E4: File %s check sum error!
E5: Download %s check error: %x !
E6: Write %s Sector %d error!
E7: Key file wrong!
E8: Key not be set. FW:%u  FILE:%u
E9: Wrong mac result = %d
E10: DRM Clear Store Fail or Generate Device Certificate Fail!
E11: kernelblk chksum error!
E12: Erase block %d fail!
E13: Remove device failed!please remove by hand
E14: can't load %s !
E15: MLC CIS Spare 0x%x: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x Error !
E16: SLC CIS Spare 0x%x: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x Error !
E17: Read SpareArea 0x%x Fail !
E18: %s, Bank0GoodBlock 0x%x >= 0x400 or BankNGoodBlock 0x%x > 0x400, ReBuild CIS !
E19: CIS Logical 0x%x overlap  Hzk area 0x%x !! HZK Addr: 0x%x
E20: Bank0 First LBA 0x%x >= 0x400
E21: Bank0 LBA 0x%x isn't in increasing order, ReBuild CIS
E22: Block_Table FAIL! Write Block Table to CIS: Addr %x
E23: 3rd Page FAIL! Write Block Table to CIS: Addr %x
E24: BankLookUpTable FAIL! Write Block Table to CIS: Addr %x
E25: Block_Table FAIL! Read CIS: Sector %x RData[%x]=%x Table[%x]=%x
E26: NO MATCH!!! CIS block Addr: 0x%x-0x%x, Kernel block Addr: 0x%x-0x%x, First Good Block:0x%x
E27: Error after Formating: CIS Logical 0x%x overlap  Hzk area 0x%x !! HZK Addr: 0x%x
E28: Re Check CIS Fail!
E29: Check CIS Fail!
E30: Build CIS Fail!
E31: Re format failed!
E32: CIS is bad and CIS backup block doesn't exist!
E33: CIS is bad and CIS backup block %x isn't reasonable!
E34: Build Backup CIS Fail!
E35: After Formatting, Copy BackUp CIS to CIS FAIL!
E36: Fill Spare SRAM %d fail! 
E37: Read ID fail!
E38: Read spare %d fail!
E39: Read RAM %d fail!
E40: Write spare %d fail!
E41: Write XRAM %d fail!
E42: Read PhySectr %d fail!
E43: Read ManufacturerMark %d fail!
E44: Mark FAIL!! Addr 0x%x Spare[0]=%d (!= 0)!
E45: NOT Matched-Bin File!! Please Check your bin file!(IC-bonding:%d, BIN:%c%c%c%c%c)
E46: System Initialization Fail!
E47: Get DataGroupSize Fail!
E48: Flash Test Fail!
E49: IC Test Fail!
E50: %s is OverSize!
E51: Please Change to Test Mode!!
E52: Read Back Check Fail: Block%x ReadData%x WriteData%x PageIndex%x
E53: Write SRAM[0x%x]=0x%x, but Read Back SRAM[0x%x]=0x%x!!\n IC or USB may be not connected well.
E54: Change to Test MP mode Fail!!
E55: Open Disk:%c Fail!
E56: Write Code Error BCode_Buf[0x%x](%x) != X_BUF[0x%x](%x)
E57: No Directory!! Please Select a Directory and Re-Start!!
E58: Copy File Fail!!(ERROR_FILE_NOT_FOUND)
E59: Copy File Fail!!(ErrorCode: %d)
E60: CE %x -- Blank Check Fail!!
E61: CE %x -- Block MarkTag Fail!!
E62: CE %x -- Build Mapping Table Fail!!
E63: Get CIS USB Block Fail!!
E64: Write CIS(%x) page%x Fail!!
E65: Read Format Capacity FAIL!! Can't Get Total Sectors Per Card!!
E66: ReadBack MBR Data Error!! Rd[%x]=%x != Wr[%x]=%x
E67: Write MBR and Hidden Sector FAIL!!
E68: ReadBack PBR Sector(%x) Error!! Rd[%x]=%x != Wr[%x]=%x
E69: Write PBR Sector(%x) FAIL!!
E70: ReadBack Reserved Sectors(%x) Error!! Rd[%x]=%x != Wr[%x]=%x
E71: Write Reserved Sector(%x) FAIL!!
E72: ReadBack FAT1 Sectors(%x) Error!! Rd[%x]=%x != Wr[%x]=%x
E73: Write FAT1 Sector(%x) FAIL!!
E74: ReadBack FAT2 Sectors(%x) Error!! Rd[%x]=%x != Wr[%x]=%x
E75: Write FAT2 Sector(%x) FAIL!!
E76: ReadBack Root Dir Sectors(%x) Error!! Rd[%x]=%x != Wr[%x]=%x
E77: Write Root Dir Sector(%x) FAIL!!
E78: Open Directory %s FAIL!! Error Code: %d (3: ERROR_PATH_NOT_FOUND, 2: ERROR_FILE_NOT_FOUND)
E79: FindNextFile FAIL!! Error Code: %d
E80: Can't Re-Format!!
E81: ISO File %s over size(%d bytes > 80MB)
E82: Can't Get UserReservedBlock!!

W1: Device create or open failed!
W2: Unknow solution,please examine flash!
W3: MP3 size no match!
W4: no bsram file!
W5: no font file!
W6: no errCode file!
W7: no init file!
W8: no key file!
W9: no uit file!
W10: device mode error!
W11: Wrong device type!
W12: User sector must between %d and %d !
W13: Unknow solution
W14: old password error!
W15: password must 8 bit!
W16: password err, input again
W17: password modify fail!
W18: no impm file!
W19: Bank%d Lookup Table is Wrong!! %x %x %x %x %x %x
W20: Bank%d LUTable LBA doesn't match!! LogicBlock %x LBA %x - PhyBlock %x SpareLBA: %x
W21: Bad block no match, LastReservedBlock %x, FirstLogicBlock %x
W22: Unknow flash ID!
W23: CIS 1st page has non-0xFF data!
W24: CIS Block has something wrong!! Bank0 Good Block %x > 0x400!
W25: CIS Block not be found!
W26: CIS is bad, but it's already been corrected!
W27: IC is %s, but MCU code is %s! sure to continue?
W28: No CIS, But Kernel Block exists!! (Addr %d, spare: %x %x %x %x %x %x)
W29: No CIS and Kernel Block, But Backup CIS exists!! (Addr %d, spare: %x %x %x %x %x %x)
W30: Bad Blocks are too many! Erase all!
W31: Change to Test MP mode Fail ONCE!!
W32: Open Disk:%c Fail! -- time: %d
W33: Please run "Format" before downloading music or iso files!
W34: no iso file for CD-ROM!
W35: no tts file!

S1:Status: connect
S2:Status: unconnect
S3:Status: formating, please wait...
S4:Status: OK, please turn off and remove the device
S5:Status: sending %s ...
S6:Status: backuping %s ...
S7:Status: checking...
S8:Status: checking encrypt key...
S9:Status: Key set ok. FW:%u FILE:%u
S10:Status: initializing DRM...
S11:Status: reconnect...
S12:Status: Building CIS...
S13:Status: read back %s ...
S14:Status: Erase All...
S15:Status: System Initialize...
S16:Status: Check if Flash is ready...
S17:Status: Check if IC is ready...
S18:Status: Format OK!
S19:Status: Copy Files to Device
S20:Status: Open Disk:%c SUCCESS!
S21:Status: Copy File %s
S22:Status: Copy %s to %s OK!!
S23:Status: re-connect, please wait...
S24:Status: re-formating, please wait...
S25:Status: Check Bad Blocks...
S26:Status: Test CE%d...
S27:Status: Bad Block -- CE %d, Bank %d, Block %d, Page %d, Sec%d, ECC%d!
S28:Status: Mark Block...
S29:Status: Total Bad Block Number in CE%d is %d!!
S30:Status: Flash Test Done!!

U1:SPDA TOOL MP V6.15 - 2008.11.05
U2:V6.15(023:081024_0(CAR), 080811_0, DRM:070208)
U3:Parameter
U4:MP3 size:
U5:BSRAM:
U6:Font:
U7:UIT:
U8:ErrorCode:
U9:Init File:
U10:Key:
U11:User reserved sector:
U12:specify size
U13:any size
U14:open
U15:check
U16:format
U17:apply
U18:start
U19:Notice: Must to click "Apply" button after modified
U20:password
U21:old password
U22:new password
U23:OK
U24:Cancel
U25:Modify password
U26:Modify
U27:new password set ok
U28:apply success
U29:Are you sure to close?
U30: IMPM:
U37:Maker:
U38:Type
U39:HZK Size:
U40:Full Erase All
U41:System Initialize
U42:Download File
U43:Select
U44:Save
U45:Select Folder
U46:Fast Erase All
U47:Warning: ~20 min. for 1GB Flash
U48:Only Erase All (not download process)
U49:CD-ROM:
U50:TTS: